purr-data issueshttps://git.purrdata.net/jwilkes/purr-data/-/issues2018-03-31T17:16:19Zhttps://git.purrdata.net/jwilkes/purr-data/-/issues/434spaces in labels2018-03-31T17:16:19ZJoão Paisspaces in labelsonly now I noticed that labels can have spaces. From what I saw, it doesn't bother in ext/vanilla, except when one tries to edit the objects - then I get the error "(Tcl) UNHANDLED ERROR: wrong # args". Did you test this feature in the o...only now I noticed that labels can have spaces. From what I saw, it doesn't bother in ext/vanilla, except when one tries to edit the objects - then I get the error "(Tcl) UNHANDLED ERROR: wrong # args". Did you test this feature in the other pd flavours?https://git.purrdata.net/jwilkes/purr-data/-/issues/445Cable inspector2018-03-31T17:13:53ZJoão PaisCable inspectorWould it make more sense to make the cable-inpector on/off for the whole pd, and not for each window individually?Would it make more sense to make the cable-inpector on/off for the whole pd, and not for each window individually?https://git.purrdata.net/jwilkes/purr-data/-/issues/444GOP abstraction refresh2018-03-31T17:13:14ZJoão PaisGOP abstraction refreshWhen there are several copies of the same gop-abstraction in a (sub)patch and the abstraction template is saved, the gui isn't updated. Only when the (sub)patch is closed and opened again. Also other cables etc. aren't displayed properly...When there are several copies of the same gop-abstraction in a (sub)patch and the abstraction template is saved, the gui isn't updated. Only when the (sub)patch is closed and opened again. Also other cables etc. aren't displayed properly. That means, when a gop changes from the inside, the patch needs a proper refresh.
This also affects display of guis inside gop. I'm sending commands to a hradio, and they aren't displayed - but the messages go through.
When this happens, pd has to be restarted to work again. Restarting the patch doesn't help enough.https://git.purrdata.net/jwilkes/purr-data/-/issues/443Subpatch dimensions2018-03-31T17:10:10ZJoão PaisSubpatch dimensionsif the dimensions of a subpatch are changed, these will only be saved if the user does save from the subpatch. This is the vanilla behavior, but I think it was improved in pd-ext (the size of subpatches is always kept, doesn't matter whe...if the dimensions of a subpatch are changed, these will only be saved if the user does save from the subpatch. This is the vanilla behavior, but I think it was improved in pd-ext (the size of subpatches is always kept, doesn't matter where it was saved). The advantage is that each subpatch always open with the correct dimensions with no hassle.https://git.purrdata.net/jwilkes/purr-data/-/issues/442Search help2018-03-31T16:27:38ZJoão PaisSearch helpAbout the search engine:
- ctrl+w doesn't work?
- there should be a chapter pointing to the extra folder? Then the person can navigate to the library they want.
- is it possible/desirable to edit the list of "chapters" in the searc...About the search engine:
- ctrl+w doesn't work?
- there should be a chapter pointing to the extra folder? Then the person can navigate to the library they want.
- is it possible/desirable to edit the list of "chapters" in the search window, so that one user can add their own? E.g. have a specific file that can be user-edited, and its contents are added to the window.https://git.purrdata.net/jwilkes/purr-data/-/issues/427literal #1 gets changed to $1 in iemgui label2018-03-25T16:54:37ZJonathan Wilkesliteral #1 gets changed to $1 in iemgui labelBecause we're aliasing "#n" to mean "$n" in iemgui label/send/receive symbols (where n is an integer), we can't use literal "#n" (again, where n is an integer) inside iemgui labels, send symbols, or receive symbols.
I *think* we're usin...Because we're aliasing "#n" to mean "$n" in iemgui label/send/receive symbols (where n is an integer), we can't use literal "#n" (again, where n is an integer) inside iemgui labels, send symbols, or receive symbols.
I *think* we're using an escaping mechanism for dollarsigns for the "Find" functionality. If so, we should extend that same mechanism to iemgui label/send/receive symbols.https://git.purrdata.net/jwilkes/purr-data/-/issues/430feature request: settable send and recieve names for [dropdown]2018-03-25T16:46:34Zsensnfeature request: settable send and recieve names for [dropdown]All the other gui-objects like bang and sliders accept 'send mysendname' as messages to change the send and/or recieve name.
[dropdown] currently throws an error: no method for send.
Moreover if you open the properties diaolog of [dropdo...All the other gui-objects like bang and sliders accept 'send mysendname' as messages to change the send and/or recieve name.
[dropdown] currently throws an error: no method for send.
Moreover if you open the properties diaolog of [dropdown] and type-in a recieve name there, the objects inlet will disapear.
It's still possible to use '$1-mysendname' in an abstraction with an argument but I think it would be nice if all the objects
from Put-menu would share the same behaviour.
best regards,
sensnhttps://git.purrdata.net/jwilkes/purr-data/-/issues/425Typo in documentation2018-03-21T18:22:44ZRishabh GuptaTypo in documentationLink: https://git.purrdata.net/jwilkes/purr-data#flavors-of-pure-data
It should be "flavours of purr-data" and NOT "pure data"Link: https://git.purrdata.net/jwilkes/purr-data#flavors-of-pure-data
It should be "flavours of purr-data" and NOT "pure data"https://git.purrdata.net/jwilkes/purr-data/-/issues/423Define language in program settings2018-03-15T17:48:23ZJoão PaisDefine language in program settingsdefine language as a sticky parameter inside the program.define language as a sticky parameter inside the program.https://git.purrdata.net/jwilkes/purr-data/-/issues/418windows innosetup failure should break build2018-03-12T21:23:41ZJonathan Wilkeswindows innosetup failure should break buildIf innosetup fails, then the *entire* build should break and CI should fail.
Btw-- if *any* part of the monstrous build system fails and that part isn't one of the lines of shell prepended with a `-`, the entire build should fail.
Is t...If innosetup fails, then the *entire* build should break and CI should fail.
Btw-- if *any* part of the monstrous build system fails and that part isn't one of the lines of shell prepended with a `-`, the entire build should fail.
Is there some tractable way to make this so?https://git.purrdata.net/jwilkes/purr-data/-/issues/419add [text insert]2018-03-10T14:42:51ZJonathan Wilkesadd [text insert]It has been reported that [text insert] is missing from Purr Data.
See if it needs to be ported.It has been reported that [text insert] is missing from Purr Data.
See if it needs to be ported.Jonathan WilkesJonathan Wilkeshttps://git.purrdata.net/jwilkes/purr-data/-/issues/413Building a second time?2018-03-07T20:48:32ZDavid MacDonaldBuilding a second time?Sorry if this is a dumb question. I'm kind of new to open source and build scripts. I just built 2.4.9 successfully, and now that I've made a few UI tweaks (adding a custom stylesheet for the UI), I'd like to build it again. However, whe...Sorry if this is a dumb question. I'm kind of new to open source and build scripts. I just built 2.4.9 successfully, and now that I've made a few UI tweaks (adding a custom stylesheet for the UI), I'd like to build it again. However, when I run the tar_em_up.sh script, I get an error:
```
mv: rename packages/darwin_app/Pd*.dmg to ./Pd*.dmg: No such file or directory
done.
```
Is this normal? Is there something I should do to remove the old build before I attempt this new one? Thanks.https://git.purrdata.net/jwilkes/purr-data/-/issues/417copying path data vs writing pd-file with path data2018-03-05T04:02:13Zsensncopying path data vs writing pd-file with path dataI'm trying to parse Svg data to a .pd file but when i open it, it doesn't work.
Opening this file gives errors:
[mysvgpath.pd](/uploads/566b56b26c9ba0b20147a3c3afc8c0bd/mysvgpath.pd)
error: draw path: path data must start with a moveto...I'm trying to parse Svg data to a .pd file but when i open it, it doesn't work.
Opening this file gives errors:
[mysvgpath.pd](/uploads/566b56b26c9ba0b20147a3c3afc8c0bd/mysvgpath.pd)
error: draw path: path data must start with a moveto command (M or m)
error: draw: path data must start with 'm' or 'M'
draw path d="M273.215
... couldn't create
error: canvas: no method for '351.061c-9.879-0.094-20.832-0.305-32.562-0.631c0.648'
[9] error: canvas: no method for 'float'
error: canvas: no method for '0.7V351.061z"'
But if i open it with a texteditor and copy just the
> draw path d="M273.215,351.061c-9.879-0.094-20.832-0.305-32.562-0.631c0.648,12.214,1.313,24.358,1.997,36.246 c10.883,0.326,21.129,0.572,30.564,0.7V351.061z";
> to a new object box, it does instantiate.
I'm trying to create several path objects from this file:
[text4.txt](/uploads/6f004fc3363277b7c55805d764e32da0/text4.txt)
I would expect purr data to instantiate the Svg-path when i open the generated .pd file.https://git.purrdata.net/jwilkes/purr-data/-/issues/366windows installer doesn't use pd icon in control panel2018-03-01T01:03:53ZJonathan Wilkeswindows installer doesn't use pd icon in control panel1. Need to change `packages/win32_inno/pd.ico` from the Pd-extended graphic to a Purr Data cat graphic.
2. Need to add directive to packages/win32_inno/pd-inno.iss.in to display the proper Purr Data icon in the uninstaller:
http://www.j...1. Need to change `packages/win32_inno/pd.ico` from the Pd-extended graphic to a Purr Data cat graphic.
2. Need to add directive to packages/win32_inno/pd-inno.iss.in to display the proper Purr Data icon in the uninstaller:
http://www.jrsoftware.org/ishelp/index.php?topic=setup_uninstalldisplayiconhttps://git.purrdata.net/jwilkes/purr-data/-/issues/416feature request: different icons for pd-console and patch windows2018-02-26T20:09:33Zsensnfeature request: different icons for pd-console and patch windowsI think it would be nice if we could have a different icon for the pd-window. If there are a lot of patch windows open it gets difficult to navigate to the pd-window from my Xfce toolbar. Maybe just a different color for the pirate-cat? ...I think it would be nice if we could have a different icon for the pd-window. If there are a lot of patch windows open it gets difficult to navigate to the pd-window from my Xfce toolbar. Maybe just a different color for the pirate-cat? Ok, there's Control-R to switch to the pd-window, but I still think it would make sense to have unique icons for Pd-Window and Patch-windows.https://git.purrdata.net/jwilkes/purr-data/-/issues/415Automatic adjustment of width 0 number widgets stopped working2018-02-12T01:51:27ZAlbert GräfAutomatic adjustment of width 0 number widgets stopped workingThis seems to be a new regression in 2.4.9, what I can say right now is that 2.4.7 doesn't exhibit this issue. (Currently building 2.4.8 so that I can confirm that it's in 2.4.9.)
Here's a screenie from 2.4.9:
![image](/uploads/fc44a09...This seems to be a new regression in 2.4.9, what I can say right now is that 2.4.7 doesn't exhibit this issue. (Currently building 2.4.8 so that I can confirm that it's in 2.4.9.)
Here's a screenie from 2.4.9:
![image](/uploads/fc44a09931f1ed992f7f4592181a0786/image.png)
Here's how it's supposed to look (screenshot from 2.4.7):
![image](/uploads/6ff799837e8faf09833afb60f9645707/image.png)
Note how the widget automatically resizes, which is what it's supposed to do when it has zero width.
Neither the main window nor the dev console shows any errors. Maybe some more fallout from the GUI refactoring?https://git.purrdata.net/jwilkes/purr-data/-/issues/406program closes on use of [disis_gpio] ..did i compile wrong?2018-02-11T20:34:38ZNewkprogram closes on use of [disis_gpio] ..did i compile wrong?Just compiled for raspberry pi 3 the recent version from github..
i did start it with root privileges like advised but get this error on commandline when it closes:
```shell
Unable to determine hardware version. I see: Hardware : BCM2835...Just compiled for raspberry pi 3 the recent version from github..
i did start it with root privileges like advised but get this error on commandline when it closes:
```shell
Unable to determine hardware version. I see: Hardware : BCM2835
,
- expecting BCM2708 or BCM2709.
If this is a genuine Raspberry Pi then please report this
to projects@drogon.net. If this is not a Raspberry Pi then you
are on your own as wiringPi is designed to support the
Raspberry Pi ONLY.
```
As i am using a Rpi3 it should actually see BCM2837
i also get allot of these (the number after the "/" differs):
```shell
[2738:2755:0125/021417:ERROR:browser_gpu_channel_host_factory.cc(119)] Failed to launch GPU process.
```
So should i report this to the email of drogon or the pd-l2ork github?
Or did i possibly do something wrong during compiling?https://git.purrdata.net/jwilkes/purr-data/-/issues/414l2ork dev mailing list is down2018-02-11T20:32:45ZJonathan Wilkesl2ork dev mailing list is downWe need a note in the repo explaining the mailing list is down atm.We need a note in the repo explaining the mailing list is down atm.https://git.purrdata.net/jwilkes/purr-data/-/issues/411maxlib/scale and other objects2018-02-04T13:25:18Zaamaxlib/scale and other objectsremade the issue so it's public -
Hi, I just updated to the latest master (2.4.9) and suddenly all of my [maxlib/scale] objects can't be created. also affected are [ggee/getdir]. Is there some other way to access them that I'm not awar...remade the issue so it's public -
Hi, I just updated to the latest master (2.4.9) and suddenly all of my [maxlib/scale] objects can't be created. also affected are [ggee/getdir]. Is there some other way to access them that I'm not aware of?
also maybe relevant: I can create [bondo] from the cyclone library but the helpfile has [cyclone/bondo] in it, which doesn't get created so there's red boxes everywhere.
I'm running Ubuntu Studio 16.04 (x86_64) and I compiled Purr Data myself from the master branch (Pd-l2ork-2.4.9 20180131-rev.d59b08e)https://git.purrdata.net/jwilkes/purr-data/-/issues/409iemgui settings dialog of toggle button doesn't close2018-01-31T22:17:42ZXRoemeriemgui settings dialog of toggle button doesn't closeTo recreate: create new, create tgl, open settings, try to close settings. Settings won't close
win 10, Purr Data 2.4.8To recreate: create new, create tgl, open settings, try to close settings. Settings won't close
win 10, Purr Data 2.4.8