Commit 8d7a2611 authored by Mathieu L Bouchard's avatar Mathieu L Bouchard
Browse files

remove unused vars

parent 5e933a0b
......@@ -362,7 +362,7 @@ static t_signal *signal_usedlist;
/* call this when DSP is stopped to free all the signals */
void signal_cleanup(void)
{
t_signal **svec, *sig, *sig2;
t_signal *sig;
int i;
while (sig = signal_usedlist)
{
......@@ -429,9 +429,8 @@ void signal_makereusable(t_signal *sig)
t_signal *signal_new(int n, t_float sr)
{
int logn, n2, vecsize = 0;
int logn, vecsize = 0;
t_signal *ret, **whichlist;
t_sample *fp;
logn = ilog2(n);
if (n)
{
......@@ -555,8 +554,6 @@ static t_dspcontext *ugen_currentcontext;
void ugen_stop(void)
{
t_signal *s;
int i;
if (dsp_chain)
{
freebytes(dsp_chain, dsp_chainsize * sizeof (t_int));
......@@ -612,8 +609,6 @@ t_dspcontext *ugen_start_graph(int toplevel, t_signal **sp,
int ninlets, int noutlets)
{
t_dspcontext *dc = (t_dspcontext *)getbytes(sizeof(*dc));
t_float parent_srate, srate;
int parent_vecsize, vecsize;
if (ugen_loud) post("ugen_start_graph...");
......@@ -707,7 +702,7 @@ static void ugen_doit(t_dspcontext *dc, t_ugenbox *u)
{
t_sigoutlet *uout;
t_siginlet *uin;
t_sigoutconnect *oc, *oc2;
t_sigoutconnect *oc;
t_class *class = pd_class(&u->u_obj->ob_pd);
int i, n;
/* suppress creating new signals for the outputs of signal
......@@ -860,7 +855,7 @@ static void ugen_doit(t_dspcontext *dc, t_ugenbox *u)
void ugen_done_graph(t_dspcontext *dc)
{
t_ugenbox *u, *u2;
t_ugenbox *u;
t_sigoutlet *uout;
t_siginlet *uin;
t_sigoutconnect *oc, *oc2;
......@@ -869,7 +864,7 @@ void ugen_done_graph(t_dspcontext *dc)
t_dspcontext *parent_context = dc->dc_parentcontext;
t_float parent_srate;
int parent_vecsize;
int period, frequency, phase, vecsize, calcsize;
int period, frequency, vecsize, calcsize;
t_float srate;
int chainblockbegin; /* DSP chain onset before block prolog code */
int chainblockend; /* and after block epilog code */
......@@ -936,7 +931,6 @@ void ugen_done_graph(t_dspcontext *dc)
(parent_vecsize * realoverlap * upsample);
frequency = (parent_vecsize * realoverlap * upsample)/
(vecsize * downsample);
phase = blk->x_phase;
srate = parent_srate * realoverlap * upsample / downsample;
if (period < 1) period = 1;
if (frequency < 1) frequency = 1;
......@@ -956,7 +950,6 @@ void ugen_done_graph(t_dspcontext *dc)
calcsize = (parent_context ? parent_context->dc_calcsize : vecsize);
downsample = upsample = 1;
period = frequency = 1;
phase = 0;
if (!parent_context) reblock = 1;
switched = 0;
}
......@@ -1004,7 +997,7 @@ void ugen_done_graph(t_dspcontext *dc)
for (u = dc->dc_ugenlist; u; u = u->u_next)
{
t_pd *zz = &u->u_obj->ob_pd;
t_signal **insigs = dc->dc_iosigs, **outsigs = dc->dc_iosigs;
t_signal **outsigs = dc->dc_iosigs;
if (outsigs) outsigs += dc->dc_ninlets;
if (pd_class(zz) == vinlet_class)
......
......@@ -155,7 +155,6 @@ static void audio_init( void)
void sys_setchsr(int chin, int chout, int sr)
{
int nblk;
int inbytes = (chin ? chin : 2) *
(DEFDACBLKSIZE*sizeof(t_sample));
int outbytes = (chout ? chout : 2) *
......@@ -199,7 +198,7 @@ void sys_set_audio_settings(int naudioindev, int *audioindev, int nchindev,
int *chindev, int naudiooutdev, int *audiooutdev, int nchoutdev,
int *choutdev, int rate, int advance, int callback)
{
int i, *ip;
int i;
int defaultchannels = SYS_DEFAULTCH;
int inchans, outchans, nrealindev, nrealoutdev;
int realindev[MAXAUDIOINDEV], realoutdev[MAXAUDIOOUTDEV];
......@@ -729,10 +728,7 @@ extern int pa_foo;
/* new values from dialog window */
void glob_audio_dialog(t_pd *dummy, t_symbol *s, int argc, t_atom *argv)
{
int naudioindev, audioindev[MAXAUDIOINDEV], chindev[MAXAUDIOINDEV];
int naudiooutdev, audiooutdev[MAXAUDIOOUTDEV], choutdev[MAXAUDIOOUTDEV];
int rate, advance, audioon, i, nindev, noutdev;
int audioindev1, audioinchan1, audiooutdev1, audiooutchan1;
int i, nindev, noutdev;
int newaudioindev[4], newaudioinchan[4],
newaudiooutdev[4], newaudiooutchan[4];
/* the new values the dialog came back with: */
......
......@@ -81,11 +81,6 @@
so i will change it maybe in future...
*/
static int alsamm_incards = 0;
static t_alsa_dev *alsamm_indevice[ALSA_MAXDEV];
static int alsamm_outcards = 0;
static t_alsa_dev *alsamm_outdevice[ALSA_MAXDEV];
/*
we need same samplerate, buffertime and so on for
each card soo we use global vars...
......@@ -163,8 +158,6 @@ static void show_availist(void)
#endif
/* protos */
static char *alsamm_getdev(int nr);
static int set_hwparams(snd_pcm_t *handle,
snd_pcm_hw_params_t *params, int *chs);
static int set_swparams(snd_pcm_t *handle,
......@@ -184,22 +177,15 @@ static void check_error(int err, const char *why)
int alsamm_open_audio(int rate)
{
int err;
char devname[80];
char *cardname;
int err, i;
snd_pcm_hw_params_t* hw_params;
snd_pcm_sw_params_t* sw_params;
/* fragsize is an old concept now use periods, used to be called fragments. */
/* Be aware in ALSA periodsize can be in bytes, where buffersize is in frames,
but sometimes buffersize is in bytes and periods in frames, crazy alsa...
...we use periodsize and buffersize in frames */
int i;
short* tmp_buf;
unsigned int tmp_uint;
snd_pcm_hw_params_alloca(&hw_params);
snd_pcm_sw_params_alloca(&sw_params);
......@@ -322,8 +308,6 @@ int alsamm_open_audio(int rate)
/* check for linked handles of input for each output*/
for(i=0; i<(alsa_noutdev < alsa_nindev ? alsa_noutdev:alsa_nindev); i++){
t_alsa_dev *ad = &alsa_outdev[i];
if (alsa_outdev[i].a_devno == alsa_indev[i].a_devno){
if ((err = snd_pcm_link (alsa_indev[i].a_handle,
alsa_outdev[i].a_handle)) == 0){
......@@ -430,7 +414,6 @@ static int set_hwparams(snd_pcm_t *handle, snd_pcm_hw_params_t *params,int *chs)
#ifndef ALSAAPI9
unsigned int rrate;
int err, dir;
int channels_allocated = 0;
/* choose all parameters */
err = snd_pcm_hw_params_any(handle, params);
......@@ -848,8 +831,6 @@ static int alsamm_start()
int devno;
int chn,nchns;
const snd_pcm_channel_area_t *mm_areas;
#ifdef ALSAMM_DEBUG
if(sys_verbose)
post("start audio with %d out cards and %d incards",alsamm_outcards,alsamm_incards);
......@@ -1354,7 +1335,6 @@ void alsamm_showstat(snd_pcm_t *handle)
{
int err;
snd_pcm_status_t *status;
snd_output_t *output = NULL;
snd_pcm_status_alloca(&status);
if ((err = snd_pcm_status(handle, status)) < 0) {
......
......@@ -163,7 +163,6 @@ void sys_pollmidioutqueue( void)
static void sys_queuemidimess(int portno, int onebyte, int a, int b, int c)
{
t_midiqelem *midiqelem;
int newhead = midi_outhead +1;
if (newhead == MIDIQSIZE)
newhead = 0;
......@@ -448,7 +447,6 @@ void sys_pollmidiinqueue( void)
void sys_midibytein(int portno, int byte)
{
static int warned = 0;
t_midiqelem *midiqelem;
int newhead = midi_inhead +1;
if (newhead == MIDIQSIZE)
newhead = 0;
......@@ -730,8 +728,6 @@ void glob_midi_properties(t_pd *dummy, t_floatarg flongform)
/* new values from dialog window */
void glob_midi_dialog(t_pd *dummy, t_symbol *s, int argc, t_atom *argv)
{
int nmidiindev, midiindev[MAXMIDIINDEV];
int nmidioutdev, midioutdev[MAXMIDIOUTDEV];
int i, nindev, noutdev;
int newmidiindev[4], newmidioutdev[4];
int alsadevin, alsadevout;
......
......@@ -233,11 +233,9 @@ void sys_poll_midi(void)
void sys_poll_midi(void)
{
int i, throttle = 100;
struct timeval timout;
int did = 1, maxfd = 0;
int did = 1;
while (did)
{
fd_set readset, writeset, exceptset;
did = 0;
if (throttle-- < 0)
break;
......
......@@ -52,7 +52,6 @@ int main(int argc, char **argv)
{
int portno;
struct sockaddr_in server;
int nretry = 10;
#ifdef MSW
short version = MAKEWORD(2, 0);
WSADATA nobby;
......@@ -119,7 +118,6 @@ usage:
static void addport(int fd)
{
int nfd = nfdpoll;
t_fdpoll *fp;
fdpoll = (t_fdpoll *)realloc(fdpoll,
(nfdpoll+1) * sizeof(t_fdpoll));
......@@ -138,8 +136,7 @@ static void addport(int fd)
static void rmport(t_fdpoll *x)
{
int nfd = nfdpoll;
int i, size = nfdpoll * sizeof(t_fdpoll);
int i;
t_fdpoll *fp;
for (i = nfdpoll, fp = fdpoll; i--; fp++)
{
......
......@@ -32,7 +32,9 @@ int main(int argc, char **argv)
struct sockaddr_in server;
struct hostent *hp;
char *hostname;
#if 0
int nretry = 10;
#endif
#ifdef MSW
short version = MAKEWORD(2, 0);
WSADATA nobby;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment